<text><span class="style1">ersion 1.0 Beta 2 limitations:- Most of the file processing in Handy Mail are RAM base. Therefore, if your list has recieved some large attachments or contains too many mails, Handy Mail might fail to unbatch them.To solve this problem, increase Handy Mail application size.</span><span class="style2">Note</span><span class="style1">: We are working on a new disk base architecture engine currently. Will be incorporated in future release.- Slow in processing. During beta 2 development, we were concern on "making it happened" instead of "making it fast". The next release will focus on speed. You should see speed increment in the next release.- Although Handy Mail can run on PowerMacintoh, but it is not yet native.- High RAM requirement. This is due to RAM base file processing routines. When we introduce disk base file processing engine, memory requirement will cut at least 500k.</span></text>
</content>
<name>Limitations of Handy Mail</name>
<script></script>
</card>
card_9431.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Err: 1001Can't find necessary resources to run.Source: "Handy Mail"Cause: The Handy Mail Main Stack has been renamed or moved to other location.Handy Mail Player will only look for files in the same folder.Err: 1002Handy Mail resources have to put together in one folder.Source: "Handy Mail"Cause: After err 1001, user select a resource stack that is not in the resource folder of Handy Mail folder.Err: 1003Handy Mail has to be run on its own Player.Source: "Handy Mail Main"Cause: User run the "Handy Mail Main" from HyperCard instead of the Player (Program).Err: 1004Not enough memory to run.Source "Handy Mail"Cause: Application memory partition too small. Try to increase the application size in Finder's Get Info window. Handy Mail need 500k of "heapspace" to run. Suggested application memory size: 1800k.Err: 1005Handy Mail needs System 7 or above to run.Source "Handy Mail"Cause: Since Handy Mail uses a lot of System 7 toolbox routines, it is not posible to run on any System software which is before System 7.Upgrade the System software to version 7 instead.</text>
</content>
<name>Error Codes</name>
<script></script>
</card>
card_7418.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Whenever you see something like [Admin], [Domain] or [Listserv] in setting up the list or listserver, it means the Pointer to the actual value that going to replace internaly when neccessary.The reason why Handy Mail used Pointers instead of the real value is that when you change the admin or listserv name, all the list settings will not have to reset to reflex the changes.Pointers currently supported are: [Amin] [Listserv] [Node] [Domain] [Password] [Error]For pointer that cannot be recognized by Handy Mail, the special bracket [] will be omited and the text with-in will be used.Eg: [custom pointer] will become "custom pointer" (without the quotation marks).</text>
</content>
<name>Special Pointer []</name>
<script></script>
</card>
card_11829.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">here are a few folders in Handy Mail that you can customize for use.</span><span class="style11">Text Files</span><span class="style1">This folder contains text files (can be open by SimpleText) that you can customize to your need. Most of the files provided here were the help command description. When subscriber send a "help" command to listserver, the "help.txt" file will be returned to subscriber."help.txt" file provides a general description of listserver and commands that available. Subscriber can then send "help commandName" where commandName is the name of the command that they wanted to find out more, to the listserver.Subscriber can also use "get fileName" where fileName is the name of the file, to obtian a file from this folder. You can create any text files that you like and put them into this folder. Spaces in the file name are not allow.</span><span class="style2">Note:</span><span class="style1">If you wanted to distribute software via this folder, convert the software to BinHex format first before you drop it into this folder (You can use Stuffit Lite to do the convertion).</span><span class="style11">Helper Applications</span><span class="style1">This folder is reserved for future use.</span><span class="style11">UUCP</span><span class="style1">This folder is where you can keep the "UUPC 3.1" software and its mail center. For more detail, see:-窶｢ </span><span class="style7">UUCP Setup</span><span class="style11">Archives</span><span class="style1">Under development.Currently archives all the incoming mails.</span></text>
</content>
<name>External Folders</name>
<script></script>
</card>
card_10919.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Listserver commands is a set of commands that any subscriber can send to the listserver via email.Listserver will normaly interpret the commands by looking at the body of the email.Handy Mail supports the following Listserver commands: Subscribe Unsubscribe List Release Get Information Help Recipients SetTo learn more about the Listserver commands, look into the "Text Files" folder under Handy Mail software.</text>
</content>
<name>Listserver Commands</name>
<script></script>
</card>
card_2317.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Since Handy Mail rely on Suffit Expander to decode various Internet Encoded file format like BinHex, UUEncode and MacBinary, you have to make sure that SuffIt Expander does not "furtur expands" the incoming file to the raw files. The raw files migh be a folder or dozens of files and folders where currently impossible to upload to FirstClass server.SuffIt Expander will normaly do this:BinHex -> SuffIt File -> Raw Files/FoldersorBinHex -> Raw File (1 only)Where Handy Mail needs only StuffIt Expander to do:BinHex -> SuffIt FileorBinHex -> Raw File (1 only)In this case, you will have to configure your StuffIt Expander thru its preferences to the following:- From the File menu of StuffIt Expander, select Preferences.- Make sure the "Expansion" option is selected.- From the right of the Preferences window, make sure:Uncheck: Expand StuffIt SpaceSaver FilesUncheck: Expand ArchivesUncheck: Delete after expandingCheck: Expand Encoded FilesCheck: Delete after expandingUncheck: Continue to expand (if possible)</text>
</content>
<name>StuffIt Expander Preferences Setup</name>
<script></script>
</card>
card_10501.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style11">ime Difference:</span><span class="style1">Your local time difference from the Greenwich Mean Time (GMT).</span><span class="style11">Log file field delimiter:</span><span class="style1">Handy Mail always update a file named "Handy Mail Log" when it runs the Sequences (you can find this file in Handy Mail folder). Incase you want to import this file into a spreadsheet or database software, you can specified what kind of delimiter to use to separate the DATE, TIME, LOG DISCRIPTION record format.Note: Most of the Mac spreadsheet or database softwares support Tab as field delimiter.</span><span class="style11">New Subscriber Deafult:</span><span class="style1">When user subscribe to one of the Lists, a new record entry will be created for the particular List. This record consist of user default password and other security options. Since the 'Subscribe' command dose not provides password and other options, Handy Mail will have to "fill in the blanks" first for subscriber to change later.</span><span class="style12">Password:</span><span class="style1">Password to use for a new subscriber. Before subscriber can change the options of their record (Concealed, Password, Address) by using the 'set' command, this password will be required for verification.See also:窶｢ </span><span class="style7">Listserver Commands</span><span class="style1"></span><span class="style12">Concealed</span><span class="style1">Make the new subscriber to become Concealed or not. By deafult, it should be off (unchecked).</span><span class="style11">Special:</span><span class="style7">Repair Data</span><span class="style1"> - Check and Repair the data files integrity. Use this button only if your data file behave strangely.</span></text>
</content>
<name>Preferences</name>
<script></script>
</card>
card_8857.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">o compose a new mail to send, filled up all the blanks and click "Send".</span><span class="style11">To: </span><span class="style1">This field is where you type in the recipient address (Internet Address). For more detail on Internet Address, see:-窶｢ </span><span class="style7">Internet Address Part</span><span class="style1"></span><span class="style11">Reply To</span><span class="style1">:This field has already filled with the default reply address. It is in the form of Handy Mail Pointer. For more detail on Pointer, see:-窶｢ </span><span class="style7">Special Pointer</span><span class="style1"> []You can change the reply address to other address, not necessary the Pointer format.</span><span class="style11">Subject:</span><span class="style1">This field is the subject of the mail and the following field is the mail body.</span><span class="style11">Mail type:</span><span class="style1">This option allow you to send mail into the following destinations: Internet Mailing List FirstClass serverChoose "Internet" to send mail via Internet. Make sure you have used a valid Internet recipient address. See:-窶｢ </span><span class="style7">Internet Address Part</span><span class="style1">Choose "FirstClass" to send mail to your FirstClass server. Make sure your recipient name is existed on the server.Choose "List" if you want your mail send directly into the mailing list that available on Handy Mail. Make sure you have selected the proper mailing list name before send. This mail will be treated as an incoming mail from Internet.</span></text>
</content>
<name>New Mail</name>
<script></script>
</card>
card_12811.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">hen "UUPC 3.1" makes a call to your service provider (SP), the SP will prompt "UUPC 3.1" for some information before it allow the connection to be established."UUPC 3.1" has to supply the answer to what ever the SP will asked.Most of the SP will ask for: User Name Login PasswordYou can find out from your SP by asking support person or just made a call to the SP with your terminal emulation software (ZTerm or Microphone, to name a few)."UUPC 3.1" allow you to automate the login sequences by providing the Login Script. Notice that Handy Mail has also prepared a "Default Login Script" that might be helpfull, but since not all of the SPs use the same pattern of login sequences, you will have to customize this script according to the SP requirement.Special Pointers are allowed in the Login Script. For more detail on Special Pointer, see:-窶｢ </span><span class="style7">Special Pointer</span><span class="style1"> []</span></text>
</content>
<content>
<layer>background</layer>
<id>1</id>
<text>UUPC Login Script</text>
</content>
<name>UUPC Login Script</name>
<script></script>
</card>
card_12755.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>The "UUPC 3.1" program.If you use "UUPC 3.1", you have to tell Handy Mail where to find the application. You can do this easily by clicking on the "Select UUPC 3.1" button.If you have been using "UUPC 3.1" for some times, make sure the application and its settings file are placed in the mail center folder (normaly called "uucp" folder on your hard disk), you can indetify this folder by looking into it. It should contains the following 3 folders: Spool Mail Config</text>
</content>
<name>UUPC Program</name>
<script></script>
</card>
card_12487.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Handy Mail works with Mail Transporters other than "UUPC 3.1".If you are not the user of "UUPC 3.1" but your Mail Transporter supports Spool and Mail folder on hard disk to keep Outgoing and Incoming mail, you should be able to use this option.Just specified the "Spool" folder and the "Mail" folder full path name. Handy Mail mail will spool outgoing mail into the "Spool" folder and check incoming mail from the "Mail" folder.By using this option, Handy Mail will not launch your compatible Mail Transporter. This means exchanging mail with your Internet service provider will not be automated by Handy Mail, since it doesn't really knows how other software works.</text>
</content>
<name>UUPC Compatible</name>
<script></script>
</card>
card_8629.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style11">odename</span><span class="style1">:The remote site nodename. The machine that you are going to connect to.To find out more about nodename:-窶｢ </span><span class="style7">Internet Address Part</span><span class="style11">Mail Server:</span><span class="style1">The name of remote site mail server.Note: If you are first time setting up UUCP connection and not sure what to fill in here, ask your service provider.</span></text>
</content>
<name>UUCP Remote</name>
<script></script>
</card>
card_8359.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">his part allow you to setup information that will use on dialup session.</span><span class="style2">Advance User Note:</span><span class="style1">Protocol has 'g' and 'f' to choose from. In general 'g' often slower then 'f'. If your modem support MNP 5 and V.42bis with data compression, try 'f' protocol instead.</span></text>
</content>
<name>UUPC Dialup Settings</name>
<script></script>
</card>
card_8186.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">andy Mail support "UUPC 3.1" software (or above) and its compatible.To set up UUCP connection, you will have to setup "UUPC 3.1" first.</span><span class="style2">For "UUPC 3.1" user:</span><span class="style1">If you are a "UUPC 3.1" user (your machine has installed with "UUPC 3.1" for sometime), all you have to do is just:- make sure your "UUPC 3.1" software and the "UUPC settings" file is in the default "UUCP" folder (This folder contains the incoming & outgoing mail that manage by "UUPC 3.1". Not the one in Handy Mail)- select the radio button of "UUPC Program"- click on "Select UUPC 3.1" button- from the Open File dialog, locate the "UUPC 3.1" software and open it.Handy Mail will display most of the settings of "UUPC 3.1" properly. Click "Done" to exit.</span><span class="style2">For new "UUPC 3.1" user:</span><span class="style1">If you haven't installed UUPC 3.1, grap a copy from the net.Follow these staps:- locate the folder named "UUCP" in Handy Mail folder. Drop a copy of the "UUPC 3.1" software into that folder.- select the radio button of "UUPC Program"- click on "Select UUPC 3.1" button- from the Open File dialog, go to "UUPC" folder and locate the "UUPC 3.1" software. Open it.- Handy Mail will prompt you to create new settings file. Click "Create".- Complete the setup by fill in all the information.- Click done.</span><span class="style2">For Non-"UUPC 3.1" user:</span><span class="style1">If you are using software other than "UUPC 3.1" but compatible with it, you can:</span><span class="style2"></span><span class="style1">- Select "UUPC Compatible" radio button.- Type in the "Spool Path" where the outgoing mails should place.- Type in the "Mail Path" where the incomming mails should place.You can leave the rest of the settings un-touch. However, choosing compatible option will fail the "UUCP" sequence during Run event. For more detail refer to:-窶｢ </span><span class="style7">Available Sequences</span><span class="style1">This means exchanging mail with your Internet provider will not be automated by Handy Mail, since it doesn't really understand how other software works.</span><span class="style2">Advance User Note:</span><span class="style1">Handy Mail support ONLY the first line of the "UUPC 3.1" Systems file. If you have custom format of Systems file, unexpacted result will most likely to occur.See Also:窶｢ </span><span class="style7">UUPC Dialup Settings</span><span class="style1">窶｢ </span><span class="style7">UUCP Remote</span><span class="style1">窶｢ </span><span class="style7">UUPC Compatible</span><span class="style1">窶｢ </span><span class="style7">UUPC Program</span><span class="style1">窶｢ </span><span class="style7">UUPC Login Script</span></text>
</content>
<name>UUCP Setup</name>
<script></script>
</card>
card_10018.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style11">ateway Name:</span><span class="style1">This is the name of the Gateway that you have created on your FirstClass server to use with Handy Mail. See also:窶｢ </span><span class="style7">Making Handy Mail Gateway in FirstClass</span><span class="style1"></span><span class="style11">Administrator Name:</span><span class="style1">This is the name that Handy Maill will send all the error message to. It can be any normal user in FirstClass, not necessary the Admin.</span><span class="style11">Replace spaces in FirstClass name:</span><span class="style1">Handy Mail allow Internet user to sent messages to FirstClass user. Since FirstClass user name format does not follow the Internet naming convention, Handy Mail will have to replace the Spaces (ASCII 32) in FirstClass user name to another character. By default, Handy Mail uses an underscore "_" (ASCII 95). Although you can change it to other character, but it is not recommended to do so.</span><span class="style11">BinHex decoder:</span><span class="style1">When an Internet use sent mail with attachments (multiparts) to Handy Mail, Handy Mail will try to decode those attachments before it routes them to FirstClass. Most of the attachments are encoded in BinHex, UUEncode or MacBinary where StuffIt Expander can handle them at once. We recommend using StuffIt Expander as a Helper Application to decode those attachments before upload them to FirstClass. Therefore you need to select your StuffIt Expander for this field.See also:-窶｢ </span><span class="style7">StuffIt Expander Preferences Setup</span><span class="style11">Keeps Decoder Open:</span><span class="style7"></span><span class="style1">Keeps the Decoder software open. This will speeds up the decoding process for attachments that came with the incoming mails. However, make sure you have enough RAM to do this.</span><span class="style11">Converts FC Attachments to BinHex</span><span class="style1">This version of Handy Mail does not handle attachments sent from FirstClass. You have to register Handy Mail to activate this feature.</span></text>
</content>
<name>FirstClass Gateway Setup</name>
<script></script>
</card>
card_7910.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Edit Subscriber window provides a simple spreadsheet alike interface for you to edit the subscriber record.A subscriber record contains the following fields: Email Address Full Name Date of Subscribed Concealed PasswordYou can change any of the field by clicking (select) on the record. Remember to click on the "Save" button after you have made changes.You can also export the subscriber list to a text file, where you can use these data on other database or spreadsheet software later.</text>
</content>
<name>Edit Subscriber</name>
<script></script>
</card>
card_7545.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style11">istsever Name:</span><span class="style1">This is the Listserver name. The name will be used as:listserverName@[Domain]User send mail to the address above to subscribe to lists that available on this server.</span><span class="style11">Listserver Header:</span><span class="style1">Since listserver also send mail to user (confirm new subscribe and others), this header field is where you can add custom information onto the mail that send by listserver. This header will be shared across all outgoing mails as well.</span><span class="style2">Note:</span><span class="style1">In most cases, you don't realy need to change anything on listserver setup dialog.</span></text>
</content>
<name>Listserver Setup</name>
<script></script>
</card>
card_2152.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">istserver (also call "listserv") is the list manager that taking care of user subsribe/unsubscribe and other requests.</span><span class="style11"></span><span class="style1">You will have to fill in all of the fields here.</span><span class="style11">Listserver Name:</span><span class="style1">The listserver name. E.g. "Listserv" or "listserver". We recommend using "listserv".</span><span class="style11">Domain:</span><span class="style1">Your domain. If you are not sure what is your domain name, type in your complete Internet address. See:-窶｢ </span><span class="style7">Internet Address Part</span><span class="style1"></span><span class="style11">Admin:</span><span class="style1">The server admin name.</span><span class="style11">Error:</span><span class="style1">The error handler. If you have mail delivery problem from other site (the subscriber has close his/he account), this is the place to return the error mail to. Not all the mail software support this.</span></text>
</content>
<name>Listserver</name>
<script></script>
</card>
card_9771.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>If you are getewaying Handy Mail to FirstClass Server, turning this option on will allow Handy Mail to 'mirror' all the mails in that particular list to FirstClass.You will have to fill in the "FC Conference Name" field to let Handy Mail knows which Conference to send all the mails to.Also, make sure you have created a new Conference with the same name in your FirstClass Server.If you want users in FirstClass to be able to join the List (Conference), make an alias of the Conference and drag it into the Gateway desktop (Refer to FirstClass manual "Part Four" to learn how to do this).</text>
</content>
<name>Route to FirstClass</name>
<script></script>
</card>
card_7116.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>This is to mark the availability of a list.If the list is enabled, it will be processed when you click on "Run Now" button or when schedule run occur.If you set this option to 'uncheck' (disabled), the list will be ignore whenever a run event occur (except when you force the list to run by clicking on "Run List" button).This option will not prevents new users from subscribe to the List.</text>
</content>
<name>Enable List</name>
<script></script>
</card>
card_6035.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">ext in this field will be sent to the new subscriber after he/she subscribed to this list. It can be a List guide or a brief greeting text.This text will also be returned to user if user send:</span><span class="style4"> information <list></span><span class="style1">command to listserv.</span></text>
</content>
<content>
<layer>background</layer>
<id>1</id>
<text>Subscribe Info</text>
</content>
<name>Subscribe Info</name>
<script></script>
</card>
card_5744.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">his text will be appended to every outgoing mail belongs to this list.</span><span class="style2">Note</span><span class="style1">If you haven't registered Handy Mail, a fixed tagline of "** Sent via Handy Mail **" will always appended to every outgoing mail.</span></text>
</content>
<content>
<layer>background</layer>
<id>1</id>
<text>List Tagline</text>
</content>
<name>List Tagline</name>
<script></script>
</card>
card_6271.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>If you are gatewaying Handy Mail to FirstClass server, this name will be used as the Conference name (in FirstClass) for Handy Mail to send all the List mails to.Note: You have to create that particular Conference folder in FirstClass server manualy.</text>
</content>
<content>
<layer>background</layer>
<id>1</id>
<text>FirstClass Conference Name</text>
</content>
<name>FirstClass Conference Name</name>
<script></script>
</card>
card_6516.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">he default mail header that will be used when sending mail to subscribers of this list.You can customize it by clicking on the Mail Header and make the changes on the field bellow it.</span><span class="style2">Example</span><span class="style1">You can change the first line of mail header from the following:-</span><span class="style3"></span><span class="style4">To: Multiple recipients of list newlist <newlist@[Domain]></span><span class="style3">to become:-</span><span class="style4">To: Subscriber of newlist <newlist@[Domain]></span><span class="style1">You can even create new header lines by clicking on the 'Text' icon.To delete a selected header, click on the trash icon.See also:-窶｢ </span><span class="style7">Special Pointer</span><span class="style1"> []</span></text>
</content>
<content>
<layer>background</layer>
<id>1</id>
<text>Mail Header</text>
</content>
<name>Mail Header</name>
<script></script>
</card>
card_6816.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Setup the list.窶｢ Mail Header窶｢ List Name窶｢ FirstClass Conference Name窶｢ Mail Header窶｢ List Tagline窶｢ Subscribe Info窶｢ Enable List窶｢ Route to FirstClass</text>
</content>
<name>List Setup</name>
<script></script>
</card>
card_13224.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text>Handy Mail allow you to set schedule to run the exchange mail sequences. Remember to turn the "Enable Schedule" option ON (Checked) after you have setup the schedule.To run Handy Mail sequences, you can click on the "Run Now" button on the main window.</text>
</content>
<name>Schedule Setup</name>
<script></script>
</card>
card_4782.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">here are a few core sequences can be choosen during Run event.</span><span class="style2">How to use?</span><span class="style1">Drag and drop the sequence into the "Run Sequence" field.</span><span class="style2">Detail:</span><span class="style1">- </span><span class="style7">Listserver</span><span class="style1">, run the listserver-</span><span class="style7"> List (All)</span><span class="style1">, run all mailing list- </span><span class="style7">UUCP Dial-up</span><span class="style1">, run the UUCP software and make call to your Internet service provider.- </span><span class="style7">FirstClass Gateway</span><span class="style1">, run the FirstClass Gateway software to exchange mail with FirstClass server.- </span><span class="style7">Quit Handy Mail</span><span class="style1">, quit Handy Mail software and back to Finder- </span><span class="style7">Delay 30 seconds</span><span class="style1">, wait 30 seconds before continue to the next sequence.</span></text>
</content>
<name>Available Sequences</name>
<script></script>
</card>
card_4404.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">hen you click "Run Now" button in the main menu, Handy Mail actually perform a series of tasks to manipulate mails.These tasks are called Sequences. You can customize the sequences that Handy Mail used to perform mail exchange.The default sequence is set to:</span><span class="style7"> FirstClass Gateway UUCP Dial-up Listserver List (All) FirstClass Gateway</span><span class="style1">Note that FirstClass Gateway runs twice in the sequences. The first time is to download outgoing mail from FirstClass. Second time is to upload incomming mail to FirstClass. If your FirstClass server wasn't on a local network, you can remove the last FistClass Gateway sequence.See also:-窶｢ </span><span class="style7">Available Sequences</span></text>
</content>
<name>Sequences Setup</name>
<script></script>
</card>
card_13466.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style1">or machine which has 4 mb of RAM, the following momery usage is consider optimum.</span><span class="style4"></span><span class="style2">Software K</span><span class="style4">System Software: 1,500 ﾂｱHandy Mail: 1,800</span><span class="style15">Total: 3,300 ﾂｱ</span><span class="style4"></span><span class="style15">Free: 700 ﾂｱ</span><span class="style4"></span><span class="style2">Warning:</span><span class="style1">The machine MUST has at least 500k of memory free after System Software and Handy Mail loaded or UUCP and FirstClass Gateway will fail.</span></text>
</content>
<name>Memory Concern</name>
<script></script>
</card>
card_3622.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style2">andy Mail requires:-</span><span class="style1">- Apple Macintosh Plus or above- 4 MB of RAM- 2 MB of free hard disk space- System 7.0 or above- Internet UUCP dialup account</span><span class="style2">Gateway Available for:-</span><span class="style1">- FirstClass Server</span><span class="style2">Helper Applications (Optional):-</span><span class="style1">- UUPC 3.1, the Mail Transporter.- StuffIt Expander, decode BinHex & others.- ToadNews, unbatch newsgroup data.</span></text>
</content>
<name>System Requirements</name>
<script></script>
</card>
card_9718.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<text><span class="style2">ow to use this help?</span><span class="style1">Whenever you see a bullet chart "窶｢" and follow by the topic name in the help text, you can just click on it to jump to that particular topic. Like:-窶｢ </span><span class="style7">Topics</span><span class="style1">窶｢ </span><span class="style7">System Requrement</span><span class="style1">A bookmark (</span><span class="style14">ﾂｻ</span><span class="style1">) will be placed on where you left. You can then click on the return button to go back to the last bookmark.Holding down the mouse button on bookmark will allow you to go any page that has bookmark on it.</span></text>
</content>
<name>Help on Help</name>
<script></script>
</card>
card_2816.xml
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE card PUBLIC "-//Apple, Inc.//DTD card V 2.0//EN" "" >
<script>on mouseUpset cursor to watchset lockMessages to trueset lockRecent to truelock screenput "" into trepeat with k = 2 to number of cards of this backgroundgo card kput "窶｢ " & line 1 of bg fld "hTitle" & return after tend repeatgo card 1put t into bg fld id 2unlock screenset lockMessages to falseset lockRecent to falseend mouseUp</script>
</part>
<content>
<layer>background</layer>
<id>2</id>
<text>窶｢ Help on Help窶｢ System Requirements窶｢ Memory Concern窶｢ Sequences Setup窶｢ Available Sequences窶｢ Schedule Setup窶｢ List Setup窶｢ Mail Header窶｢ List Name窶｢ FirstClass Conference Name窶｢ List Tagline窶｢ Subscribe Info窶｢ Enable List窶｢ Route to FirstClass窶｢ Listserver窶｢ Listserver Setup窶｢ Edit Subscriber窶｢ FirstClass Gateway Setup窶｢ UUCP Setup窶｢ UUPC Dialup Settings窶｢ UUCP Remote窶｢ UUPC Compatible窶｢ UUPC Program窶｢ UUPC Login Script窶｢ New Mail窶｢ Internet Address Part窶｢ Preferences窶｢ StuffIt Expander Preferences Setup窶｢ Listserver Commands窶｢ External Folders窶｢ Special Pointer []窶｢ Error Codes窶｢ Limitations of Handy Mail</text>
![< prev](/view/10866/HYPERLIB-1997-Winter-CD1.ISO.7z/HYPERLIB-1997-Winter-CD1.ISO/オンラインウェア/COM/Handy Mail 1.0b4 folder.sit/Handy Mail 1.0b4 folder/Handy Mail 1.0b5 Patch/Drag items to "Resources"/HM Help/BMAP_9200.png){kind=link}
![next >](/view/10866/HYPERLIB-1997-Winter-CD1.ISO.7z/HYPERLIB-1997-Winter-CD1.ISO/オンラインウェア/COM/Handy Mail 1.0b4 folder.sit/Handy Mail 1.0b4 folder/Handy Mail 1.0b5 Patch/Drag items to "Resources"/HM Help/PATs.png){kind=link}